0.4mm 3D Printer Nozzle, Fit for MK10, for 1.75mm Filament Stainless Steel 1pcs

Description

Document
Feature:Stamp size on surface, convenient to pick the one you need.The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc. Specification:Fit for 3D Printer: MK10Material: Stainless SteelScrew Thread: M7Thread Length: 4mmNozzle Diameter: 0.4mmInput Diameter: 4mmFit Filament Diameter: 1.75mmOverall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D) Package Content:1 x Nozzle NOTE: Small accessories, please keep away from kiddie.After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. How to Replace Nozzles?1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.Notice: Please don’t touch the old nozzle and heat block3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Filament Refills PLA Filaments Clear Purple 1.75mm, for 3D Printing Pen, 40pcs
USD
7.07
Electronic Radiators Aluminium Heatsink 56x8x11mm Black Pack of 4
USD
7.75
Electronic Cooler Aluminium Heatsink 9x9x4mm Silver Tone Pack of 20
USD
7.75
Electronic Cooler Aluminium Heatsink 20x9x5mm Silver Tone Pack of 10
USD
7.16
Electronic Cooler Aluminium Heatsink 25x9x5mm Black Pack of 10
USD
7.75
Electronic Radiators Aluminium Heatsink 60x16x16mm Black Pack of 4
USD
8.82
0.4mm 3D Printer Nozzle, Fit for MK10, for 1.75mm Filament Stainless Steel 1pcs
Feature:
Stamp size on surface, convenient to pick the one you need.
The hole of print nozzle is consistent size and machining, the thread is clean and well formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.
Specification:
Fit for 3D Printer: MK10
Material: Stainless Steel
Screw Thread: M7
Thread Length: 4mm
Nozzle Diameter: 0.4mm
Input Diameter: 4mm
Fit Filament Diameter: 1.75mm
Overall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D)
Package Content:
1 x Nozzle
NOTE:
Small accessories, please keep away from kiddie.
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
How to Replace Nozzles?
1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block
3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Hot Item
14x14x6mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 100 Pcs
USD 18.53
M5 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 10pcs
USD 11.95
Electronic Cooler Aluminium Heatsink 50x20x3mm for CPU Silver Tone Pack of 10
USD 8.81
20x14.5x13mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 20 Pcs
USD 15.41
Heatsink for 3D Printers Fit for 1.75mm and 3.00mm, for V6 Black 3pcs
USD 11.86
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
0.4mm 3D Printer Nozzle, Fit for MK10, for 1.75mm Filament Stainless Steel 1pcs
Feature:
Stamp size on surface, convenient to pick the one you need.
The hole of print nozzle is consistent size and machining, the thread is clean and well formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.
Specification:
Fit for 3D Printer: MK10
Material: Stainless Steel
Screw Thread: M7
Thread Length: 4mm
Nozzle Diameter: 0.4mm
Input Diameter: 4mm
Fit Filament Diameter: 1.75mm
Overall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D)
Package Content:
1 x Nozzle
NOTE:
Small accessories, please keep away from kiddie.
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
How to Replace Nozzles?
1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block
3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Filament Refills PLA Filaments Clear Purple 1.75mm, for 3D Printing Pen, 40pcs
USD
7.07
Electronic Radiators Aluminium Heatsink 56x8x11mm Black Pack of 4
USD
7.75
Electronic Cooler Aluminium Heatsink 9x9x4mm Silver Tone Pack of 20
USD
7.75
Electronic Cooler Aluminium Heatsink 20x9x5mm Silver Tone Pack of 10
USD
7.16
Electronic Cooler Aluminium Heatsink 25x9x5mm Black Pack of 10
USD
7.75
Electronic Radiators Aluminium Heatsink 60x16x16mm Black Pack of 4
USD
8.82
Hot Item
14x14x6mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 100 Pcs
USD 18.53
M5 Tube Fitting for 3D Printer Push Fixings, for 4mm Tube 1.75mm Filament 10pcs
USD 11.95
Electronic Cooler Aluminium Heatsink 50x20x3mm for CPU Silver Tone Pack of 10
USD 8.81
20x14.5x13mm Aluminum Heatsink Electronics Cooler for MOS IC Chip Silver 20 Pcs
USD 15.41
Heatsink for 3D Printers Fit for 1.75mm and 3.00mm, for V6 Black 3pcs
USD 11.86
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Mar-25-22 at 10:37:29 PDT, seller added the following information: