1.75mm PLA ABS Filament Welder Connector for 3D Printer For Ender 3 Pro Anet

Description

Product Description
Specification:
Product Name: Filament Welder Connector
Fit for: 1.75mm Filament
Suitable: PLA
.
ABS ect
.
filament
Usage: 3D printer
Color: Black or Sliver
Material: Aluminum
Advantages:
Refuse filament waste: If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a model,it can be connected to continue printing.
Print models in multiple colors:Different colors of the same filament can be connected to print out a multi-level model
.
Suitable for:Wide range of applications for most 1.75mm filaments: PLA/ABS/PETG/PC/PP/PVB/HIPS, etc
Filament Welder Connector material:All-metal 3d printer filament connector using all-metal materials, high-quality, innovative design, easy to use
.
Note: Light wire exposure to the air for a long time will often be water loss and brittle. To prevent the filament from becoming brittle, please keep it sealed.
How to use
Trim the two filament heads that need to be connected.
One end pass-through from the big end of the connector to expose 1-2mm.
The other end pass-through from the small end of the connector to expose 1-2mm.
Burn with fire for 5-7 seconds. (This time is mainly for ordinary PLA , ABS other harder filament should be slightly longer).
Then quickly push the filament from the small end into the small hole at the big end, slowly (must not be fast).
Then slowly pull back when the joint is exposed, back and forth several times.
After the filament is completely cooled, the filament is completely pushed out from the small head end until it can be easily trimmed. If the filament is not smooth enough, you can trim it gently with a knife.
Test the results after the repair is completed(carefully bend the joint - straighten - bend - straighten).
If you hear a crisp sound, we need to weld again.
Unscrew the bolt at one end of the waist groove of the connecting piece, take out the filament, and assemble the filament welder for next use.
Package including:
1PC *
Filament Connector
1PC
*
Allen Key
Shipping
We guarantee to send out goods within 24-72 hour after receiving payment .
We have listed the best and fastest logistics channels online for you to choose.
If you have certain logistics channels, please leave us a message.
Returns and Warranty
All items are tested and made sure in good condition before shipping.
If the item is defective/damaged,please contact us within 48 hours after receiving the goods,we often refund or replace a new one.
Contact to us:
1. Your better feedback will be an encouragement for us to offer the better quality and the better service in future.
2. If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within 1- 2 business day. We shall try our best to solve your problem to your satisfaction.