Apex 14 way 54201416 to 9 pin w/JAM NUT ELD cable 2019 Kenworth Pete RP-1226 24"

Description

Apex 2.8 14 way to 9 pin green type 2 threaded ELD adapter cable. Includes jam nut for mounting if desired.
Built to
conform to accessory connector for VECU per TMC RP-1226 specification
Wired same as pre-2018 Paccar (Peterbilt, Kenworth) and all makes and models 2013 and newer
24" length
Heavy duty 18 gauge stranded wire cable
Provides +12VDC power, Ground, J1939/CAN and J1708/J1587 circuits
Provides the following at 9 pin;
Green pin               Function
A                             Ground
B                             +12 Volts
C                             + J1939/CAN HI (S-CAN)
D                             - J1939/CAN LO (S-CAN)
H                           + J1939 500kbs/CAN HI (K-CAN)
J                           - J1939 500kbs/CAN LO (K-CAN)
F                              + J1708/J1587 HI
G                             -J1708/J1587 LO
Fits accessory connector found on 2019 and newer heavy trucks such including Kenworth and Peterbilt. If your truck has the warning label shown in picture 8 above this is the connector that plugs into the accessory connector located above fuse panel or on left side of steering column behind dash cover.
On vehicles with warning label you should only use the accessory connector to power and run your telematics, ELD or other aftermarket devices that require data from J1939, CAN or J1708. This conforms with TMC RP1226
This connects your 9 pin round green ELD device to the accessory connector
The Apex 2.8 sold here are genuine Aptiva parts - Formerly Delphi and conforms to VECU TMC RP-1226 specification
Thanks for looking!