Creality 3D Printer Kit with PTFE Teflon Tubing,Metal Bed Springs PC4-M10

Description

SearQing Creality Upgrade 3D Printer Kit with PTFE Teflon Tubing,Premium Metal Bed Springs, PC4-M10 Pneumatic Fittings and Two Blue Collet Clips
【Professional】The tubes in this series are suitable for 1.75mm filaments,and rated for higher temperature usage than cheaper PTFE alternatives.The inner diameter tolerance is much stricter than competitors in this field, and it can bring better performance in all Bowden-style printers that use it.
【Upgrade】 Compared with today's ordinary 3D printer plastic extruders, this upgrade helps to ensure that the feed rate is more uniform over time and has higher wear resistance. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine.
【Compatible with printer】 The spring contained in this package is suitable for CR-10 series printers and is 5 mm longer than Ender series springs. But they are compatible with Ender series printers. You may need to raise the z-axis limit switch by 4-6mm to accommodate the longer length. These 6 heavy-duty springs provide much more resistance and will hold the bed level much longer than your stock printer springs.This ensures more consistent results, higher print quality.
【High-quality upgrade parts】 The stainless steel pneumatic fittings are top of the line fittings with metal teeth inside that will grasp the PTFE tubing ensuring that it doesn't slip as the filament is pushed in or retracted out.
【100% Quality Assurance】Every product we create is our philosophy, that is to make the life better. SearQing is committed to providing high-quality products with value-for-money functional design. If you are not satisfied with our products, please contact us at any time, we will give you a satisfactory answer.
Product Description
More About Details:
Please intall the fitting Pneumatic fitting on the extruder first, then insert the tubing and push it in until it couldn\'t be pushed, then install the littble blue clip.
The metal extruder can work pretty good and gets rid of filament slipping and the awful knocking that comes with it and the tube is long enough to upgrade 2 printers or keep one as a spare.
The all metal extruder is very well built and can grip the filament alot better than the plastic stock one. The tube is also a great improvement as it guides and feeds the filament alot better as there is not alot of play inside the tube like stock one had.
Attention Please:
Springs included in this bundle are stiffer and sturdier than the stock bed springs on all ender series printers. The spring sizes also differ from the stock springs in length by roughly 5mm. in order to install the new springs, you may need to raise the z-axis limit switch by 4-6mm to accommodate for the longer length of these sturdier springs.
This bundle is a must have for new printer owners and experienced hobbyists alike. Combined, the parts in this bundle will allow more accurate printing at higher speeds, higher print quality results as well as fewer failures, better performance on retraction, and more consistent extrusion.
Package Included:
This bundle includes 1 aluminum extruder, 1 meter of PTFE bowden tubing, 6 bed springs, 1 collet clip and 4 pneumatic fittings for all printers.