-40%
GRAY 6 pin to 16 pin OBD2 OBD-II diagnostic adapter cable J1587/J1708 ELD AEOBRD
€ 15.75
- Description
- Size Guide
Description
This adapter allows you to connect your 16 pin OBD2 scanner, device or cable to BLACK 9 pin Deutsch diagnostics connector found on medium and heavy-duty trucks and equipment 2005 and newer. Also connects to green 9 pin found on 2013 and newer.The gray end can also be used on 2005 and older that have the GRAY 6 pin in dash
If you have questions or need assistance to see if this will fit your application please contact me - I respond very quickly!
Approximately 12" length
Provides power, ground, CAN/J1939 and J1708/J1587 data found on factory 9 Pin connector
NOTE: Your device or scanner must have 16 pin MALE plug and MUST be able to read J1708 or CAN/J1939 and detailed in picture above
One end has Deutsch HD16-9-1939S-P80 GREEN 9 pin plug with locking ring - this connects to your factory connector located in vehicle -
you must have the BLACK or GREEN round 9 pin diagnostic in dash to connect this side, works on both GREEN and BLACK!
Other end has J1962F Female 16 pin OBD2 type connector (this is the same connector that is mounted under dash in passenger vehicles)- this connects to your device such as ELD, scanner, telematics, GPS tracker and so on
Provides the following;
OBD2 connector PIN SIGNAL
4 & 5 GROUND
16 + 12 VDC
6 CAN/J1939 + (HI)
14 CAN/J1939 - (LO)
2 J1708/J1587 + (HI)
10 J1708/J1587 - (LO)
see picture 5 above for pin layout on OBD2 connector
Ships from the USA within 1 business of order!
LIFETIME WARRANTY!!!! If this cable ever fails return to me for a free replacement
(does not cover physical abuse or modifications)
Thanks for looking and I welcome any questions you may have!