National Instruments PCI-6071E Data Acquisition Board with Cable and Interface

Description

This is a complete system with National Instruments PCI-6071E Data Acquisition Board, cable and interface box. Condition is Used but fully functional. The device, cable and interface box were personally tested using NI MAX software.  Everything passed the self-test and internal calibration.  Using the test panel with a DVM and scope, each I/O pin and function was basically tested and worked as expected.
For reference the general specifications are as follows.  Check with NI documentation for detailed specs.
Analog Inputs
64 single-ended or 32 differential
12-bit resolution
1.25MS/s max sampling rate
+/- 50mV to +/- 10V bipolar, 0-100mV to 0-10V unipolar
FIFO buffer size - 512 samples
Analog Outputs
2 voltage outputs - 0-10V unipolar, +/- 10V bipolar
12-bit resolution
Max update rate for waveform generation - 400 kS/s to 1 MS/s depending on application
FIFO buffer size - 2,048 samples
Digital I/O
8 channels input/output
5V TTL compatibility
Transfer rate - 50 kwords/s max, typical 1-10 kwords /s continuous
Timing I/O
Channels - 2 up/down counter/timers, 1 frequency scaler
5V TTL compatibility
Base clocks available:  counter/timers - 20MHz or 100kHz, frequency scaler - 10MHz or 100kHz
Multiple trigger modes available from internal and external sources
If you want a great multifunction DAQ board for general engineering uses, this is a good board.
Shipped with USPS.