Production Monitor / Parts counting device with rejected count

Description

This device will count the repetition of an industrial process. Mostly intended for parts production tracking, it can handle two sensors, one for parts made and an optional one for rejects. A production goal can be set, and the green bar maps the progress.
Please see the video of how it works at:
https://youtu.be/qNbKSih7aHI
Instructions, wiring and AC adapter are included.
Here is a quick startup guide:
1. Make electrical connections as shown in the illustration above and power up the
device.
For “sensors” you can use limit switches, relays, infrared detectors, capacitive or
magnetic proximity sensors or any other device that will provide a clean (no voltage)
on – off switch.
2. Observe the bottom right corner of the screen. If “Locked” please unlock it with the
key.
3. Adjust the desired production target for your situation. At this time you can
also reset the device by pushing and holding the Knob for 5 seconds. This will
clear all values except the “Target”.
4. Once the Target is set, lock the Knob using the key. Once locked, the Target values are
no longer adjustable and the device cannot be reset. The Parts Counter™ will function
even if the knob is left unlocked, however we recommend locking it to avoid unwanted
adjustments or resets.
Power up your machine and observe readings:
With each On-Off cycle of the “Good” parts sensor, the number will increase and the progress bar
will fill in proportion to the set Target.
The same will happen with the optional “Rjct” field, counting the rejected parts. The rejection
percentage is calculated as a percentage of the bad parts compared to the Total parts made.
The “Total” field will add a unit with any “Good” or “Rjct” field update.
At the end of the of your production cycle, or shift, we recommend un-locking and resetting the
device. This will clear the “Good”, “Rjct” and “Total” fields priming it for the next batch.
Specifications:
Input Voltage; 12VDC 50-100mA
Length, width, height: 2"x3.9"x4.9"(52mmx100mmx125mm)
Screen Size: 3.5 inch diagonal. (90MM)
Weight: 9 Oz or 260 Grams.
Maximum Part Count Speed: 10 part per second.
Maximum Part Count “Good” “Rjct” or “Totl”: 10,000
(Wider/Faster Limits are available on request)
Warranty: 1 Year.
Please inquire at (714) 485 9631 or contact us