R REIFENG 3pcs 24V 50W Thermistor Ceramic Cartridge Heater Tube and 3pcs HT-N...

Description

R REIFENG 3pcs 24V 50W Thermistor Ceramic Cartridge Heater Tube and 3pcs HT-N...
【About 24v 50w cable】From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
【About 24v 50w cable】The original 40W power to 50W, therefore, the maximum temperature increases from 300-310℃ to 340-350℃
【About HT-NTC100K wires】304 stainless steel,HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
【About HT-NTC100K wires】Working temperature: -50°C ~ +350°C,can replace the original K-type thermocouple temperature,very fit for print high-temperature filament
Before buying, please make sure that this product meets your needs.
24V 50W Ceramic Cartridge Heater Tube Produce Description From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful. The original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life. Support the customization of different specifications, length, resistance of the heater. Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees). Product specification Voltage: 12V/24V Power: 50W Heating head size: 6 * 20mm Heating head material: 304 stainless steel Line length: 1M Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;) Heating temperature: up to 350 degrees Package included: 3 Pcs Single-ended heater instructions 1. The effective heating part of the heater must keep dry. 2. The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded. 3. Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases. 4. Electric components should be stored in a dry place. HT-NTC100K Thermistor Temperature Sensor Produce Description Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple. The temperature measurement range is increased
Shipping
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.