-40%

USB-3210 USB Data Acquisition Card 16Bit 125KSa/s 8 Analog Inputs 4 In 4 Out

$ 226.97

Availability: 50 in stock
  • MPN: Does Not Apply
  • Condition: New
  • Refund will be given as: Money Back
  • Maximum Sample Rate: 125kSa/s
  • Item must be returned within: 30 Days
  • Custom Bundle: No
  • Brand: Unbranded
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • Modified Item: No

    Description

    Description
    USB-3210 USB Data Acquisition Card 16Bit 125KSa/s 8 Analog Inputs 4 Digital Inputs 4 Digital Outputs
    USB-3210 Introduction:
    - Resolution: 16-bit
    - Sampling Rate: 125kSa/s
    - Analog Input: 8-ch
    - Analog Output: None
    - Digital Input: 4-ch
    - Digital Output: 4-ch
    Description:
    It is a multifunctional data acquisition card based on the high-speed USB2.0 interface, which can be used for continuous high-speed signal acquisition and continuous high-speed output of control signals when connected to a computer. The data acquisition card can measure analog and digital signals, and record measurement data continuously and uninterruptedly to a computer hard disk; it can also output digital signals, can output periodic repetitive signals, or high-speed output of uninterrupted non-repetitive signals controlled by the computer . It supports use in operating system for Windows, provides a standard dynamic link library, and supports for mainstream development languages such as VC++, VB, C#, LabVIEW, and Matlab.
    Analog Input:
    - Number of channels: USB-3210: 8 single-ended/4 differential
    - ADC type: SAR
    - Resolution: 16-bit
    - The highest sampling rate: USB-3210: 125kS/s, continuous without interruption, the sum of the channels used
    - Timing resolution: 10ns
    - Channel synchronization: No
    - Range: ±10.24V / ±5.12V / ±2.56V / ±1.28V / ±0.64V
    - Input coupling mode: DC
    - Input impedance: 500MΩ
    - Small signal bandwidth (-3 dB): 450kHz
    - Input bias current: 0.7nA
    - The highest voltage of analog input: the voltage of each input terminal to ground does not exceed ±12V
    - Software FIFO: 2MPts/Ch
    - Pre-trigger FIFO: 4096Pts
    - AI acquisition mode: continuous acquisition mode and limited number of acquisitions
    Digital I/O:
    - Number of channels: 4 inputs, 4 outputs
    - Reference ground: DGND
    - Digital input: pull-up resistance 10kΩ
    - Digital input voltage: High level: 1.95V~5V; Low level: 0V~1.2V
    - Digital output voltage: High level: 3.3V; Low level: 0V~0.003V
    - Digital output power state: low level
    - DIN highest sampling rate: 10MS/s/Ch
    - The highest update rate of DOUT: 10MS/s/Ch
    - Timing resolution: 10ns
    - Channel synchronization: yes
    - DIN software FIFO: 2MPts/Ch
    - DIN pre-trigger FIFO: 2048Pts/Ch
    - DOUT hardware FIFO: 2048Pts/Ch
    - DIN acquisition mode: continuous acquisition mode and OneShot mode
    - DOUT output mode: direct output, periodic generation of onboard FIFO waveform, onboard FIFO waveform to trigger N cycles, uninterrupted non-repetitive signals buffered by the computer
    - DOUT edge time: rising edge: 6ns; falling edge: 8ns
    External Trigger:
    - Number of external trigger channels: 1 input, 1 output
    - Input voltage: high level: 1.95V~5V; low level: 0V~1.2V
    - Output voltage: High level: 3.3V; Low level: 0V~0.003V
    - Output power state: low level
    - Output edge time: rising edge: 6ns; falling edge: 8ns
    External Sampling Clock I/O:
    - Number of channels: 1 input, 1 output
    - Input voltage: high level: 1.95V~5V; low level: 0V~1.2V
    - Output voltage: High level: 3.3V; Low level: 0V~0.003V
    - Output power state: low level
    - Output frequency range: DC ~ 1 MHz
    - Output edge time: rising edge: 6ns; falling edge: 8ns
    Calibration:
    - Recommended warm-up time: no less than 20 minutes
    - Recommended calibration interval: 1 year
    Bus Interface:
    - USB: USB2.0 high speed interface
    Power Supply Requirements:
    - USB interface power supply: 4.5V~5.5V
    - Typical current without load: 400mA
    - Maximum load: 600 mA
    Physical Characteristics:
    - Size: Without connector: 150*96*28mm; With connector: 150*112*28mm
    - Weight (g): Without connector: about 185g; With connector: about 230g
    - I/O connector: screw terminal
    - Screw terminal connection: 16AWG~28AWG
    - USB connector: USB Type B
    Package Included:
    - 1 x Set of Data Acquisition Module
    Payment Terms
    1.We accept PayPal only.
    2.All major credit cards are accepted through secure payment processor PayPal.
    3.Payment must be received within 7 business days of auction closing.
    4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    Shipping Terms
    - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
    Return Terms
    1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
    2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
    3. We reserve the right to refuse any returns for objective reasons.
    Custom Duties & Taxes
    1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
    2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
    Feedback
    1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
    On Dec-24-20 at 01:01:12 PST, seller added the following information: