Voron 2.4r2 Printed Parts Kit Functional ASA - Choose Color - USA Made/Shipped

Description

This is a 3D printed Kit for the Voron 2.4r2. This is the most recent up to date printed parts for Voron 2.4r2.
Please note, these DO NOT come with threaded inserts by default. You can purchase pre-installed threaded inserts from the drop down if you want them installed for you.
These are printed in ASA which exceeds ABS+ properties!
If you select Custom Color please send me a message with what color you want.
If you need a custom color or custom part send me a message I can do many colors and I do all high temp materials.
These exceed the recommended settings by the Voron team!
5 Perimeters,
50% Grid Infill,
5 Top Layers, 5 Bottom Layers.
This kit includes every functional part to get your Voron up and running.
This kit
DOES NOT include non-essential parts
such as the skirts, panel mounts and electronics compartments. You can print those yourself once you get your Voron running.
Below is the list of every part included:
Electronics_Bay
lrs_200_psu_bracket_x2.stl
pcb_din_clip_x3.stl
PSU_stabilizer_50mm.stl
raspberrypi_bracket.stl
rs25_psu_bracket.stl
wago_221-415_mount_3x5.stl
Electronics_Bay > Controller_Mounts
Octopus_bracket_set.stl
Gantry
[a]_z_belt_clip_lower_x4.stl
[a]_z_belt_clip_upper_x4.stl
z_chain_bottom_anchor.stl
z_chain_guide.stl
Gantry > AB_Drive_Units
[a]_cable_cover.stl
[a]_z_chain_retainer_bracket_x2
a_drive_frame_lower.stl
a_drive_frame_upper.stl
b_drive_frame_lower.stl
b_drive_frame_upper.stl
Gantry > Front_Idlers
[a]_tensioner_left.stl
[a]_tensioner_right.stl
front_idler_left_lower.stl
front_idler_left_upper.stl
front_idler_right_lower.stl
front_idler_right_upper.stl
Gantry > X_Axis > X Carriage
[a]_blower_housing_front.stl
blower_housing_rear.stl
hotend_fan_mount.stl
pinda_adapter.stl
probe_retainer_bracket.stl
probe_retainer_bracket_9mm.stl
x_carriage_frame_left_MGN12.stl
x_carriage_frame_right_MGN12.stl
Gantry > X_Axis > X Carriage > Direct Feed
[a]_connector_cover.stl
[a]_guidler.stl
[a]_latch.stl
[a]_latch_shuttle.stl
chain_anchor_2hole.stl
extruder_body.stl
extruder_motor_plate.stl
Gantry > X_Axis > X Carriage > Printheads > E3D_V6
printhead_front_e3dv6.stl
printhead_rear_e3dv6.stl
Gantry > X_Axis > XY Joints
[a]_endstop_pod_D2F_switch.stl
[a]_endstop_pod_hall_effect.stl
[a]_xy_joint_cable_bridge_3hole.stl
xy_joint_left_lower_MGN12.stl
xy_joint_left_upper_MGN12.stl
xy_joint_right_lower_MGN12.stl
xy_joint_right_upper_MGN12.stl
Gantry > Z_Joints
z_joint_lower_x4.stl
z_joint_upper_hall_effect.stl
z_joint_upper_x4.stl
Z_Drive
[a]_belt_tensioner_a_x2.stl
[a]_belt_tensioner_b_x2.stl
[a]_z_drive_baseplate_a_x2.stl
[a]_z_drive_baseplate_b_x2.stl
z_drive_main_a_x2.stl
z_drive_main_b_x2.stl
z_drive_retainer_a_x2.stl
z_drive_retainer_b_x2.stl
z_motor_mount_a_x2.stl
z_motor_mount_b_x2.stl
Z_Endstop
nozzle_probe.stl
Z_Idlers
[a]_z_tensioner_x4_9mm.stl
z_tensioner_bracket_a_x2.stl
z_tensioner_bracket_b_x2.stl